Amanngirrbach Giroform Modo De Empleo página 24

M A C H I N E S P E C I F I C A T I O N S
4.3 CE Declaration of Conformity
This product was designed and manufactured
based on careful selection of the harmonised
standards to be observed, as well as additional
technical specifications. It thus corresponds with
the state-of-the-art and ensures maximum safety.
In terms of design and performance, this product
complies with the European Directives and the
supplementary national requirements. Conform-
E N
ity has been confirmed with the CE marking.
Directives
2014/30/EU
2014/35/EU
Applied harmonising standards
DIN EN 61010-1:
2020
UL 61010-1:2012
CAN/CSA-C22.2
Nr. 61010-1:2012
Tab. 1
The product's declaration of conformity is availa-
ble upon request from the manufacturer.
24
EMC Directive
Low-Voltage Directive
Safety regulations for electri-
cal measuring, control and
laboratory equipment
Safety regulations for electri-
cal measuring, control and
laboratory equipment
Safety regulations for electri-
cal measuring, control and
laboratory equipment
4.4 Installation
▷ Place the machine on a worktable.
▷ Insert the mains plug into a socket outlet.
The machine is ready for operation.