Idiomas disponibles
Idiomas disponibles
5. Commissioning and operation
5. Commissioning and operation
CAUTION!
Damage to the measuring instrument by operation outside the upper
or lower limits of the operating temperature
Failure to observe the permissible operating temperature, also taking
into account convection and radiation, can even cause damage to the
thermometer during mounting.
▶
The upper and lower limits of the specified operating temperature range
must not be exceeded.
WARNING!
Physical injuries and damage to property and the environment
caused by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
Should a failure occur, aggressive media with extremely high temperature
and under high pressure or vacuum may be present at the instrument.
▶
For these media, in addition to all standard regulations, the appropriate
existing codes or regulations must also be followed.
5.1 Installation scope
The following is a guide for installation of eTEFRACTO-PAD
It gives guidelines and suggestions for preparation, installation and welding
eTEFRACTO-PAD
the manufacturer can only provide instructions based on proven procedures for a
typical application. For any questions regarding the installation, please contact the
manufacturer.
WIKA operating instructions model TC59-E (eTEFRACTO-PAD)
thermocouples. Due to the wide variety of application possibilities,
tubeskin thermocouples.
EN
11
