Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
1.
2.
Loosen the guard mounting nut from the motor housing.
3.
guard mounting nut clockwise until it is tight.
4.
Push the blades along the motor shaft, then fasten them securely by turning the
blade nut anti-clockwise.
5.
rim, then join them together with the clips provided.
6.
Secure the front guard and the rear guard with the small screw and nut.
OSCILLATION CONTROL
1.
Use the buttons on the fan body to turn the fan on or off and to change the speed:
0 - stop; 1 - low speed; 2 - medium speed; 3 - high speed.
2.
Oscillation: Push the oscillation knob to make the fan move from side to side. Pull
the oscillation knob to stop the movement.
3.
Pitch: To change the pitch angle of the fan, push the fan guard up or down to the
desired angle.
CAUTION
-
Incorrect operation and improper use can damage the appliance and cause injury
to the user.
-
The appliance may be used only for its intended purpose. No responsibility can be
taken for any possible damage caused through incorrect use or improper handling.
-
Before connecting the appliance to the power source, check that the current and
-
Do not put the appliance or the plug in water or any other liquid. If the appliance
accidentally falls into water, make sure your hands are dry and unplug the
appliance immediately. Discard the appliance once it is safe to do so.
-
Never attempt to open the housing yourself.
-
Do not place any kind of object into the housing.
-
appliance itself is wet.
-
Do not touch the plug with wet or damp hands.
-
Check the power cable and the plug regularly for any possible damage. If the
power cable or plug is damaged, it must be replaced by the manufacturer or a
Tabla de contenido
