Idiomas disponibles
Idiomas disponibles
EN
maximum speed of the blade is
compatible with the machine. Only
perform this operation with the
machine disconnected from the
mains supply.
NOTE: It is recommended that
the operator considers wearing
protective gloves when handing the
blade during installation or when
changing the machines blade.
Cross recesses
screws
screw off
1. Ensure the machine is in "Mitre
Saw" mode with the "Cutting Head"
in its upper position.
2.Release the "Retractable Lower
Blade Guard" by cross screwdrives.
and safely storing its pivot screw.
Undo
Bayonet
spanner
3. Use the "Bayonet Spanner"
(provided) to hold the "Circular and
Concave Hole" of the blade flange.
4. Use the "6mm Hex Key"
(provided) to unscrew the arbor
screw.
NOTE: The arbor screw has a left
hand thread turn clockwise to undo
Tel.: +351 256 331 080
and counterclockwise to tighten.
Fax.: +351 256 331 089
www.centrallobao.pt
1. Remove the arbor screw, washer
22
and outer blade flange.
2. Manually operate the "Lower
Blade Guard" and retract it fully up
into the body of the machine.
3. Remove the balde by withdrawing
it outwards to clear the end to of
the arbor and then downwards and
forwards away from the machine.
DECLARATION
CÓDIGO
OF CONFORMITY
VISCC12210
We declare under our exclusive
responsibility, that the product
Meets the following standards
or standardization documents:
EN 61029-1:2009+A11, EN 61029-
2-11:2012+A11, AfPS GS 2014:01,
EN 55014-1:2017, EN 55014-
2:2015, EN IEC 61000-3-2:2019,
EN 61000-3-3:2013, according to
the determinations of the directives:
2006/42/EU - Machinery
Directive;
2014/30/EU - Electromagnetic
Compatibility Directive.
Central Lobão S.A.
S. João de Ver, 30th June of 2021.
Central Lobão S. A.
O Técnico Responsável
Responsible for the Technical File
Hugo Santos
Hugo Santos
6mm
Hex key
WARRANTY TERMS
The warranty for this product is in
accordance with the law in force
from the date of purchase. You
should, therefore, keep your proof
of purchase during this period. The
warranty covers any manufacturing
defect in material or operation, as
well as parts and work needed for
their repairing.
21
Excluded from the warranty are
the misuse of the product, any
repairs carried out by unauthorized
individuals (outside the service
center of the brand VITO) as well as
any damage caused by its use.
