if the AC power supply is interrupted, the clock display goes
off and the alarm setting is canceled. To back up the clock and
alarm, insert a 6F22 battery in the battery compartment on the
rear of the unit. > @
¢ The backup function lasts about 10 minutes.
¢ The backup battery is not for radio reception.
Replacing the battery
Replace the battery with new one if the clock display flashes or
the alarm timer does not work properly when you connect the
AC power cord again.
Note on battery
¢ When you are not going to use the unit an a long period of
time, remove the battery to prevent possible electrolyte
leakage.
¢ To prevent the risk of electrolyte leakage or explosions,
never recharge the battery, apply heat to it, or take it apart.
SETTING THE CLOCK > ©
1 Connect the AC power cord to a wall outlet (@).
The clock display begins flashing.
2 Keeping CLOCK down, press SLOW to set the clock.
To increase the clock digits quickly, press FAST instead of
SLOW.
The clock starts running at "OO" seconds.
To display the seconds, press SNOOZE.
> ©
The seconds are displayed while the button is pressed.
The 1st place of the minute
(®) Seconds
