MAHLE BatteryPRO E-HEALTH Charge 20 Manual De Usuario página 57

Plug in charging connector
Take the Charging connector from the
n
charging cable holder and plug the con-
nector into EV charging inlet
It will normally take less than 10 seconds
n
to start the process after completing the
physical connection of charging connector
to charging inlet
E-Health diagnostics
1. Start the E-Health App
2. Select the vehicle you would like to test in
database
3. Connect the E-HEALTH Charge 20 to the
power supply and connect the charging
cable to the test vehicle
4. Connect the VCI diagnostic scantool to the
On-Board-Diagnostics (OBD) connector of
the vehicle
5. Fill out test data
57