Idiomas disponibles
Idiomas disponibles
STORAGE
1. Please choose a dry, ventilated and cool place to store this product.
2. Please place the product properly to prevent children from touching the product.
3. Do not place it in direct sunlight.
4. Do not place the product at high temperature or high pressure to avoid damage to the
product.
HOW TO REPLACE THE ROLLING GRINDING HEAD
Note: Before replacing the grinding head, make sure that the power supply is disconnected
and the machine is turned off.
When changing the grinding head, put a new grinding head into the product until the
sound of "click" is heard. Be sure that the newly installed grinding head is clamped in place
and installed on the fuselage correctly. If the grinding head is not connected properly, do
not turn on the product switch. Specific steps: firstly, turn off the machine, press the side
button, pull out the rolling grinding head and install the grinding head to be used (Fig.2,
Fig.3, Fig.4, Fig.5).
Note: When unpacking the product, the grinding head installed on the machine body is
a fine grinding head.
5. COMMON FAULTS AND ANALYSIS
Fault
description
1. The battery has no
electricity.
Unable to
2. The power button was not
boot
pressed.
3. There is something wrong
with the machine.
The grinding
The grinding head buckle is
head does
not installed in place and the
not turn
gear is not well matched.
Fault analysis
Processing method
1. Recharge the battery before using it.
2. Press the key to start the machine.
3. Contact the after-sales service depart-
ment for handling.
Remove the grinding head and reinstall it
at the slot. And check whether the gear is
installed in place.
