the skin. If the press is too tight and the force is too large, the product will stop. During
use, you can stop to check whether the exfoliation is satisfactory. If it does not work, you
can use it again at this part (stay for 2 or 3 seconds) and check it again. Until the smooth
and delicate skin reappears.
3. After grinding your feet, rinse them with water or use a wet towel to remove the excess
of dandruff.
4. After use, please turn off the machine, clean it and store it out of the reach of children.
TIPS
1. Ensure that the product has sufficient power.
2. Ensure that the grinding head has been installed on this product.
3. The grinding head has a plastic sealing film. Before use, please tear the film from the
side of the grinding head with a sharp object before use.
4. Clean and soften the skin, and dry the moisture in the used part to ensure the best
effect. (Note: Do not use if there is a wound or bleeding on the skin)
5. Choose the gear according to your actual needs of grinding your feet. The first gear
gently peels off dead skin, and the second gear forcefully removes cocoons. Do not press
it too tightly when using, gently rub your feet, and let the grinding head gently cross the
skin. Do not press hard to grind the same part continuously for more than 3 seconds, but
grind it intermittently for less than 3 seconds at a time.
6. To achieve better results, wipe your feet with a dry towel, clean dead skin, apply foot
cream or moisturizing cream to your feet, and then massage properly.
CLEANING AND MAINTENANCE
Note: Please clean the product after use to keep the product clean and keep the product
in a high-performance state.
Cleaning: Turn off the machine, press the side button, remove the grinding head, and clean
the joint between the grinding head body and the grinding head with a cleaning brush
(Fig.6, Fig.7, Fig.8). When you need to rinse the product under the faucet, you can turn
on the machine to keep the grinding wheel running for 5- 10 seconds, which can clean
quickly and efficiently (Fig.9).
After cleaning, please turn off the machine and wipe the water drops on the fuselage of
this product with a clean dry cloth.