Idiomas disponibles
Idiomas disponibles
Press the pin in firmly and turn
slightly clockwise.
Release the pressure on the pin and
continue to turn it clockwise until it
clicks (approximately ¼ turn).
Note:
If the pin can no longer be turned without pressing it, it is
securely in place.
16
EL / EN
EL / DE
3.
OPERATION
3.1 ADJUSTING THE TWIST-IN EYECUPS
In principle, you can choose between four different setting
positions that provide varying distances between your eye
and the lens. You can set the optimal distance according
to your personal preference.
Pos. A: Initial position without specta-
cles: Twist out the eyecups anti-
clockwise to the full extent.
Pos. B: Initial position with specta-
cles: Twist in the eyecups clock-
wise until they stop.
Pos. C and D: Alternative positions or
interim adjustment stages for spec-
tacle wearers and non-spectacle
wearers.
3.2 ADJUSTING THE INTERPUPILLARY DISTANCE
To see a single round image, adjust the separation bet-
ween the two halves of the binoculars until the irritating
shadows disappear.
EL / EN
EL / DE
17
