Idiomas disponibles
Idiomas disponibles
11
Problems
Causes
1. The battery is out
of power
2. The battery is
Shears will not start
not connected
3. Safety lock of the blade
cannot be unlocked
4. On/off switch failure
1. Loose internal
Intermittent operation
connections
2. On/off switch failure
1. The blade is not sharp
2. There is a gap between
Hot blades
blades
3. Poor lubrication, resulting
in excessive friction
1. Poor lubrication, resulting
in excessive friction
2. The blade is dirty
Poor trimming
3. The blade is not sharp
4. Incorrect trimming
performance
tecnique
5. The battery is not fully
charged
138
Art. 614
Telescopic shears Magma E-35 TR 21 V
Troubleshooting
Solutions
1. Charge the battery.
Instructions on page 127.
2. Check that the battery is inserted
correctly. When connected correctly,
it makes a „click" sound.
3./4. Send to repair service center by
local authorized reseller or Stocker Srl.
1./2. Send to repair service center
by local authorized reseller or
Stocker Srl
1. Sharpen the blade or replace it.
Instructions on how to sharpen the
blade on page 134, on how to replace
the blade on page 133.
2. Adjust the gap between the
blades. Instructions on page 133.
If the adjustment doesn't solve
the problem, replace the blade.
Instructions on how to replace the
blade on page 133.
3. Carry out the lubrication process.
Instructions on page 132.
1. Carry out the lubrication process.
Instructions on page 132.
2. Clean the blade. Instructions on page
131.
3. Sharpen the blade or replace it.
Instructions on how to sharpen the
blade on page 134, on how to replace
the blade on page 133.
4. Carefully read operating
instructions in the "Usage" section.
5. Check the battery charge level.
Instructions on page 130.
Art. 614
Telescopic shears Magma E-35 TR 21 V
Troubleshooting
Problems
Causes
1. The battery is not properly
placed in the charger
2. The battery charger is
not connected properly to
The battery will not
the power supply
charge. Charger
3. The contact point of the
red light flashes.
battery or of the battery
charger is dirty
4. Defective or damaged
battery or battery charger.
The telescopic lock
1. Breakage or loss of a
system does not
piece of the locking system
work.
Inner tube slips off
1. Latch is missing
the outer one
The handle cannot
be lengthened or
1. Twisted cable
shortened.
For assistance and service, please contact your local authorized reseller or Stocker Srl.
For further information about the product, please contact [email protected]
11
Solutions
1. Check that the battery is placed
correctly. When connected correctly, it
makes a „click" sound.
2. Connect correctly.
3. Clean with a dry cloth.
4. Try recharging the battery by inserting
it into both sockets of the battery
charger. If only one of the two inputs
charges, the other input is damaged or
defective.. Contact your local authorized
reseller or Stocker Srl for spare parts.
1. Replace the locking system piece.
Contact the local reseller or Stocker
srl to request spare parts or send the
product for repair to a local authorized
reseller or Stocker Srl.
1. Add the appropriate screw to prevent
the problem from happening again.
Contact your local reseller or Stocker srl
to request spare parts.
1. Send to repair service center by local
authorized reseller or Stocker Srl.
139
