Idiomas disponibles
Idiomas disponibles
Step 4 Setting Scheduled Charging Time:
If you wish to delay the start of charging to avoid peak electricity
hours, you can set a scheduled charging time by pressing the
scheduled time button. Each press increases the delay by 30
minutes. The system will begin a countdown as soon as you
plug in the charging connector, and charging will commence
when the countdown reaches zero. When the scheduled
countdown begins, the LED indicator will turn to a steady blue
.
light
There are two ways to cancel a scheduled charge:
1.
Press and hold the scheduled time button for 3 seconds; the timer will
reset to 00:00:00, effectively canceling the scheduled charge.
2.
The maximum scheduling limit is 12 hours. If the time exceeds 12 hours,
the timer will automatically reset to 00:00:00, canceling the scheduled
charge.
Step 5 Charging
Open the cover of the electric vehicle's charging port, insert the Type 2
connector into the vehicle, and ensure it is securely connected.
the charging process, the LED indicator will display a green pulsing
light.
If the Type 2 connector is not fully inserted and properly secured, the
electric vehicle may not accept the charge.
Step 6 Charging Complete:
Once charging is complete, the LED indicator will turn to a steady green light, and the screen
will display the charging duration and energy consumption. At this point, you can unplug
the EV Type 2 connector, close the cover of the electric vehicle's charging port, and also
cover the Type 2 connector with its rubber cap. Neatly store the cable; the screen information
will disappear once the EV connector is unplugged.
Step 7 Power off
After use, you can press the power button to turn off the device.
In the event of a critical error, smoke emission, or fire, the device must be
immediately shut down.
During
11
