Idiomas disponibles
Idiomas disponibles
PWS 0165
is not suitable for places constantly exposed to humidity).
• Do not place the fan near flames, cookers or heaters.
• Do not obstruct the air flow.
DESCRIPTION
1. Front grill.
2. Blade.
3. Rear grill.
4. Motor.
5. Speed control knob
6. Swing.
7. Swing selector.
8. Motor shaft.
9. Motor support.
10. Screw of motor adjust and tilt.
11. Mast.
12. Base.
Remove the screw from bottom side of mast.
•
Place mast on base and screw it by bottom side
of the base.
Put the fan motor on motor support of top of
•
mast and fit it with the screw.
Place the rear grill in front of motor and screw
•
it. Put the blade in the motor shaft and assure it
tightening its screw. To fix the front grill it is
just necessary placing in front of rear grill and
adjusts it with flanges of the frame.
To amend the height of the fan just have to
•
loosen up the screw which is perpendicular to
mast and go up or go down until get the
desired height. After that tighten the screw again.
OPERATING INSTRUCTIONS
• Step 1: Set the fan base on a level and stable surface.
• Step 2: Please make sure the Speed knob is in the 0 position. Plug cord into any standard AC outlet.
• Step 3: The speed is adjusted by moving the knob left or right to the desired setting (0-Off; 1-Low; 2-
Medium; 3-High)
• Step 4: To connect swing function, unscrew the screw on bottom of motor and change of position as
below pictures show.
8
