Safety Message To Installers - Federal Signal STREAMLINE LP7 Instrucciones De Instalación

Ocultar thumbs Ver también para STREAMLINE LP7:

Instrucciones de instalación (12 páginas)

página de 16

/ 16
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

INSTALLATION AND SERVICE INSTRUCTIONS FOR STREAMLINE

People's lives depend on your safe installation of our products. It is important to read,

understand, and follow all instructions shipped with this product.

Selection of mounting location for this device, its controls and routing of wiring should

be made by the Facilities Engineer and the Safety Engineer. Listed below are other im-

portant safety instructions and precautions you should follow.

• This unit must be installed and maintained by a qualified electrician in accordance with

National and local Electrical Codes, under the direction of the authority having juris-

diction.

• Do not connect this unit to system wiring when circuits are energized.

• For optimum sound distribution do not install this device where objects would block

the front of the sounder.

• All effective warning horns produce loud sounds which, in certain circumstances, may

cause permanent hearing loss. Take appropriate precautions such as wearing hearing

protection. Recommendations in OSHA Sound Level Standard (29 CFR 1910) should

not exceeded.

• After installation, be sure that all threaded joints are securely tightened.

• After installation and completion of initial systems test, a program for periodic testing

of this device must be established.

• After installation and completion of initial system test, provide a copy of this instruc-

tion booklet to all personnel responsible for the operation, periodic testing, and mainte-

nance of this equipment.

I. GENERAL

The Federal Signal Model LP7 sounder/strobe provides an audible and visual signal

when activated remotely. The sounder is a polarized device rated at 18–28 Vdc. The

LP7 can provide 32 different tones with an adjustable volume located on the inside of

the unit. For a list of tones, see Table 1.

Electrical Details:

Termination:

Voltage Range:

Starting Current:

Running Current:

Monitoring:

Mechanical Details:

Diameter:

Overall Depth:

IP Rating:

Temp. range:

Material:

LP7 SOUNDER/FLASHER