Safety Messages To Installers - Federal Signal 350WBX Vibratone Manual De Instalación

Safety Messages to Installers

The installation, maintenance, and disposal of this product must be
carried out in accordance with national codes and standards.
It is important to follow all instructions shipped with this product.
This device is to be installed by a trained electrician who is
thoroughly familiar with and will follow all applicable national
and local codes in the country of use.
The selection of the mounting location for the device, its controls
and the routing of the wiring is to be accomplished under the
direction of the Facilities Engineer and the Safety Engineer. In
addition, listed below are some other important safety instructions
and precautions you should follow:
• Read and understand all instructions before installing or
operating this equipment.
• Do not connect this unit to the system when power is on.
• Optimum sound distribution will be severely reduced if any
objects are in front of the speaker. You should ensure that the
front of the speaker is clear of any obstructions.
• All effective warning horns produce loud sounds which may
cause, in certain situations, permanent hearing loss. The device
should be installed far enough away from potential listeners to
limit their exposure while still maintaining its effectiveness.
National Noise Standards, such as The OSHA Code of Federal
Regulations 1910.95 in the United States, provide guidelines
which may be used regarding permissible noise exposure levels.
• After installation, ensure that all mounting screws are
tightened.
• Establish a procedure to routinely check the sound system for
proper activation and operation.
• Provide a copy of these instructions to the Safety Engineer,
operator(s) and maintenance personnel.
Model 350WBX Vibratone
Installation Instructions
Horn
®
5