Idiomas disponibles
Idiomas disponibles
NOTE
The value set with the "D" buttons does not represent the set temperature. It only indicates
the intensity level of the unit. The value of the temperature reached by the appliance depends, among
other things, on the value of the outside temperature and the quantity and temperature
of the products placed inside.
220-240V AC POWER SUPPLY
−
−
−
−
−
12V DC POWER SUPPLY (CAR SUPPLY)
−
−
−
−
gh
t's
USB socket 5V, 2 A
gy
−
• Recommendations
−
ore
ols
−
en
−
e.
cts
−
dle
−
−
om
• CLEANING AND MAINTENANCE
nal
−
−
te
WARNING: Do not immerse the appliance in water.
−
Place the unit on a flat and stable Surface.
Connect one end of the power cord (8) to the "E" socket and the other end to the mains socket.
Switch the unit on using the "B" button. The display "C" will show the temperature value inside
the appliance.
Use the "D" buttons to set the operating mode (positive value - heating, negative value - cooling)
and the intensity level.
Optionally, the ECO function can be activated using button "A".
The ECO function only works with a 220-240V power supply. Current consumption is reduced
in this case. The ECO function can be used, for example, when storing small quantities of food.
Place the unit on a flat and stable surface.
Plug one end of the power cord (7) into the "F" socket and the other end into the car's cigarette lighter
socket.
Switch the unit on using the "B" button. The display "C" will show the temperature value inside
the appliance.
Use the "D" buttons to set the operating mode (positive value - heating, negative value - cooling)
and the intensity level.
is used to charge devices.
store foodstuffs in their own packaging to prevent the direct effects of frosting or condensation
and the permeation of odours,
in the case of vehicle power supply, do not operate the refrigerator from the power socket when
the vehicle is stationary (engine switched off).
in the case of car power supply, do not operate the fridge from the cigarette lighter socket
for more than 3 hours when the car is not in use (the car engine is switched off) - prolonged
operation leads to excessive battery discharge,
a change of temperature in the insulated container (frequent opening or switching off) leads to natural
phenomena in the form of frost or condensation visible on the walls of the container or the inside
of the lid, as well as directly on the foodstuffs,
the optimum temperature inside the insulated container, while maintaining certain constant external
parameters, is usually reached between 2 and 4 hours after the appliance has been in operation.
the appliance is not designed to cool warm or hot foodstuffs.
Before carrying out any maintenance or repair work, switch off the appliance and disconnect
it from the power supply.
Clean the housing, fittings and power cord with a soft, slightly dampened cloth with a little dishwashing
detergent.
Do not use any harsh cleaning agents for cleaning cause damage to the surface of the housing.
11
