Idiomas disponibles
Idiomas disponibles
Safety Messages
Snap-on Tools Company provides safety messages to
cover reasonable situations that may be encountered
when operating, servicing or repairing cordless tools. It
is the responsibility of operators and servicing
technicians to be knowledgeable about the procedures,
tools and materials used, and to satisfy themselves that
the procedures, tools and materials will not compromise
their safety, that of others in the work place or the tool.
Read these instructions carefully before using
Inverter. Read all cautionary marking on battery,
charger and all tools or products that use the
batteries.
INSTRUCTIONS PERTAINING TO A
RISK OF FIRE, ELECTRIC SHOCK OR
INJURY TO PERSONS.
IMPORTANT
SAFETY
INSTRUCTIONS
When using the Inverter, basic precautions
should always be followed, including the
following:
1. Read all the instructions before using the Inverter.
2. To reduce the risk of injury, store idle tools out of
reach of children and other untrained persons. Close
supervision is necessary when the appliance is used
near children.
3. Use only accessories that are recommended by the
manufacturer for your model. Accessories that may
be suitable for one tool may create a risk of injury
when used on another tool.
4. STORE IDLE APPLIANCES INDOORS. When not in
use, the Inverter should be stored indoors in dry, and
high or locked-up place-out of reach of children. Do
not use outdoors.
5. USE RIGHT APPLIANCE. Do not use the Inverter for
any job except that for which it is intended.
ZCTI8850 Rev. D
CTI8850
Inverter
(Battery and Charger sold separately)
6. INSTALL RIGHT BATTERY. CTI8850 Inverter can be
7. DO NOT FORCE APPLIANCE. It will do the job better
8. Disconnect battery pack from the Inverter or push the
9. AVOID DANGEROUS ENVIRONMENTS. Do not use
10. Use only the charger supplied by the manufacturer to
11. When battery pack is not in use, keep it away from
12. Check for misalignment or binding of moving
13. Always disconnect the battery pack before replacing
14. NEVER immerse the unit in water or any other liquid,
15. DO NOT open the Inverter -- there are no user-
16. DO NOT insert foreign objects into the USB outlet or
2
used only with CTB7185/CTB8185 battery pack.
and with less likelihood of a risk of injury at the rate
for which it was designed.
switch in the off position before making any
adjustments, changing accessories, or storing the
tool. Such preventive safety measures reduce the risk
of starting the tool accidentally.
the Inverter in damp or wet locations. Do not use it in
the rain.
recharge.
metal object like: paper clips, coin, keys, nails,
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting
the battery terminal together may cause sparks,
burns, or fire.
parts,breakage of parts, and any other condition that
may affect the tool's operation. If damaged, have the
tool serviced before using. Many accidents are
caused by poorly maintained tools.
any parts, replace with the same rating part. This
manual contains important safety and operating
instructions.
or use when wet. Do not operate near flammable
materials, fumes or gases. DO NOT expose to
extreme heat or flames.
serviceable parts inside.
the three prong outlet.
SAVE THESE
INSTRUCTIONS
(03/16)
