Idiomas disponibles
Idiomas disponibles
3.4. Select the desired power:
• 0 (OFF) – Hot air (1.000W) – Very hot air (2.000W).
• The light indicator will light automatically, indicating that the heater is heating up.
EN
3.5. Once the room has reached the desired temperature, slowly turn the thermostat knob
counterclockwise until the appliance is switched off with a soft "click". From this mo-
ment, the heater will connect and disconnect automatically, keeping the selected tem-
perature constant.
3.6. Defrost mode
reached and it is easy for the water in the internal pipes to freeze. It will maintain the
temperature of the room at about +5ºC.
3.7. TL-39VM Model: This model incorporates an oscillation function which allows heated
air projected by the heater to be distributed more quickly into the room. By pressing the
switch located on the base (0/I), you can activate/deactivate the oscillation
4. DISCONNECTION DUE TO OVERHEATING
If any operating trouble is produced, the overheating disconnection system will automatically
disconnect the heater. If this occurs:
• Disconnect the heater from the mains, unplugging the plug from the socket.
• Let the convector heater cool down for 15 minutes.
• Check that the air inlet and outlet grilles are not blocked. If necessary, clean them with a
vacuum cleaner.
If the heater still does not work normally after these checks, please contact the extensive
network of S&P Offi cial Distributors.
5. MAINTENANCE
• Before carrying out any maintenance work, make sure that the device has been disconnec-
ted from the mains and let the heater cool down for a few minutes.
• Periodically, to prevent an accumulation of dust, clean the inlet air fi lter. Acting on the
same tab, you can easily remove the fi lter. You can use a damp cloth with water or a vacuum
cleaner. Never use petrol or aggressive and /or abrasive dissolvents to clean the device.
• Do not immerse the device or spray with water.
• If the appliance is not to be used for any length of time, we recommend returning it to its
original package and storing it in a dry, dust-free place.
10
: This device is especially useful in places where low temperatures are
