Idiomas disponibles
Idiomas disponibles
7
General instructions
Normally, the cuts are uniform and do not cause damage to the plants. If a fault occurs, simply
release the trigger and the chain will stop to avoid personal injury or damage to property.Do not
use the power tool on rainy days. Check that the chain is sharp before use. To achieve optimal
performance and avoid chainsaw damage, it is necessary to keep the chain always sharp,
properly lubricated and tensioned during use. Always remove the battery when not using the
chainsaw to prevent accidental injury to people or damage to property.
194
Art. 616 / Art. 617
Chainsaw Magma E-100 LM / E-150 LM 21 V
Usage
Art. 616 / Art. 617
Chainsaw Magma E-100 LM / E-150 LM 21 V
Usage
Recharging the battery (not included)
Do not expose the battery to extreme conditions such as high temperatures or
shocks. Otherwise personal injury will occur due to the loss of electrolyte solution.
Before using or charging, make sure the battery and charger are both dry.
•
When purchased, the battery is not fully loaded.
Therefore, the user must fully charge it before using it for the first time.
•
Do not charge the battery for a long time, avoid using all the battery power, otherwise the
battery will be damaged.
•
If the battery runs out quickly after charging, it is a sign that the battery is no longer wor-
king efficiently and must be replaced. Only original batteries can be used. To purchase a
new battery, you can contact a local dealer or Stocker srl.
•
You should always follow the safety instructions, the environmental regulations and infor-
mation.
•
Place the charger in a room between 10°C and 22°C at room temperature to prevent any
moisture from entering.
•
Make sure the switch is in the OFF position.
•
Connect the battery to the charger using the appropriate interlock.
For further information about the product, please contact [email protected]
7
195
