Idiomas disponibles
Idiomas disponibles
3
Power tool safe use
1.
Do not overload the tool by using it beyond the predefined operating specifications.
Choosing the right power tool will make your job more efficient and much safer. Using the
chainsaw, battery or charger beyond the design specifications stated may result in serious
or fatal injury and property damage.
2.
Do not attempt to use the tool if one of the switches is not working properly. Power tools
that cannot be properly controlled with switches tare dangerous and must be repaired.
3.
Disconnect the power tool from the battery before any adjustment, cleaning, maintenance,
replacement of accessories or before storage. This procedure will reduce the risk of acci-
dental tool start-up.
4.
Store unused power tools out of the reach of children.
5.
Do not allow power tools to be used by people who are not familiar with them or who have
not read these instructions. Power tools are dangerous when used by people who are not
properly trained.
6.
Tool maintenance: check that the moving parts are in position or are blocked, check for any
damage to components and other conditions that affect tool operation. If damaged, the
power tool must be repaired before use. Many accidents are caused by poorly maintained
power tools.
7.
Always keep the chain sharp and clean. Well-kept tools with sharp chains are less likely to
get stuck and are easy to handle.
8.
Use the power tool, accessories and tools in accordance with the operating instructions
and working conditions. It is dangerous to use power tools for operations they are not
intended for.
9.
To ensure equipment life and to prevent deterioration, it is necessary to store it with a suf-
ficient battery charge. When not in use, charge the battery at least once every 6 months.
10. Do not turn on the power switch when it is being stored.
172
Art. 616 / Art. 617
Chainsaw Magma E-100 LM / E-150 LM 21 V
Instructions for safe use
Art. 616 / Art. 617
Chainsaw Magma E-100 LM / E-150 LM 21 V
Instructions for safe use
Precautions for cordless power tools with battery (not included)
1.
Before inserting the battery into your chainsaw, make sure that the trigger and lock buttons
are in the neutral position to prevent accidental start-up.
2.
Recharge only with the charger included in the supply or supplied by Stocker srl. Using an
unsuitable charger poses a fire risk.
3.
Use only the batteries included in the supply or supplied by Stocker srl. Using non-original
batteries may cause damage and pose a fire risk.
4.
Keep metal objects, such as paper clips, coins, keys, nails, screws or other small metal
objects, that could connect one terminal to the other, away from the battery. A short circuit
on the battery terminals may cause a fire.
5.
If used inappropriately, battery liquid may leak out and contact must be avoided. In the
event of accidental contact, rinse with water. If the fluid comes into contact with the eyes,
seek medical advice. Liquid leaking from the battery is corrosive and causes burns.
6.
Keep all body parts away from the chainsaw when operating. Before starting the chainsaw,
make sure that the chain is not in contact with anything. The slightest distraction during
operation may cause clothing or parts of the body to get caught in the chain.
7.
Wear safety goggles and hearing protection devices. It is recommended to wear additional
protective equipment to protect your head, hands, legs and feet. Full protective clothing will
reduce personal injury caused by flying debris or accidental contact with the chain.
8.
Make sure to stand firmly and on a solid, safe and flat surface before operating the chain-
saw. Slippery or unstable surfaces, such as ladders, can cause loss of balance or control of
the chainsaw.
9.
Materials with a very thin thickness can jam the chain when cutting shrubs or saplings,
once freed they can hit the operator or make them unbalanced.
10. Turn off the chainsaw before transporting it, hold the front handle firmly and keep it at an
appropriate distance from the body. Make sure to put the protective cover on the bar when
transporting.
For further information about the product, please contact [email protected]
3
173
