Idiomas disponibles
Idiomas disponibles
Use
Putting on and taking off
knee and elbow pads
NOTE: The elbow and knee pads are easily distin-
guished by size: the knee pads are larger than the
elbow pads. The right and left are the same.
First open the hook-and-loop fasteners.
Now pull the elbow pads with the built-in sleeve
over the arms and the knee pads over the legs.
Be sure the plastic plates cover the entire knee
or elbow.
Now secure the protectors with the elastic fasten-
ers. To do so, wrap them around your arms or
legs and press the ends with the hook-and-loop
fastener onto the respective hook-and-loop pad
on the protector (see Fig. A). The elbow and knee
pads must fit snugly so they will not move.
ATTENTION! Do not pull the fasteners so tight
they do or may restrict blood flow.
Take the elbow or knee pads off in the reverse
order.
Putting on and taking off
wrist guards
First open the hook-and-loop fasteners on the
fasteners
and
1
2
guard are different and therefore marked ac-
cordingly with "L" for left and "R" for right.
Insert your thumb through the respective open-
ing of the corresponding guard so the palm is
covered by the padded inside.
Now press the fasteners
hook-and-loop pad
Now take the fastener labelled
feed it through the designated loop as shown
and press onto the designated hook-and-loop
pad
to secure. The guards must fit snugly
3
so they will not move.
ATTENTION! However, do not pull the hook-
and-loop fasteners
or may restrict blood flow.
Take the wrist guards off in the reverse order.
. The left and right wrist
onto the respective
1
to secure.
3
in figure C,
2
and
so tight they do
1
2
Maintenance and care
Carefully inspect the protectors for damage be-
fore every use, and particularly after falls. If for
instance the protectors are torn, cracked or parts
have come loose, they can no longer be used.
In this case, they should be disposed.
Do not modify the protectors, or protection is no
longer guaranteed. Any modification of original
parts, materials or the design can significantly
reduce performance. The same applies if they
are very dirty or used incorrectly.
For example, use a brush to clean dirt off the
hook-and-loop fasteners. This ensures they
fasten well.
Do not clean with harsh cleaning agents.
Never machine wash or tumble dry or iron the
protectors.
Dirt can simply be brushed off the protectors.
For stubborn stains, please hand wash in tepid
water or a neutral detergent solution. Rinse with
clear water.
Do not expose the protectors to direct sunlight
or excessive heat during storage and transport.
Tears or decomposition may result. This can re-
duce the life and considerably affect usability.
Disposal
The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out product.
GB/IE
11
