Beta 1742AN Instrucciones página 4

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
OPERATION MANUAL AND INSTRUCTIONS FOR HEAVY DUTY RIVETING PLIERS FOR THREADED INSETS
MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALY
This illustrated operating manual comprises the following sections: WARNINGS, SPECIFICATIONS, OPERATING INSTRUC-
TIONS. Before operating this tool, carefully read this illustrated OPERATING MANUAL for safe, proper, satisfactory use.
Original documentation drawn up in ITALIAN.
WARNINGS
PRODUCT FEATURES
Th rivet nut tool is designed to fasten rivet nuts with threaded mandrels, from M3, M4, M5, M6, M8, M10, M12 (10-24, 1/4-20,
5/16-18 and 3/8-16).
Length: 15" (390 mm)
Stroke: 7 mm
Mandrel size
M3
M4
M5
M6
M8
M10
M12
OPERATING INSTRUCTIONS
1. Choose the size of the rivet to be installed.
2. Install a mandrel in a size matching the chosen rivet (section 'Spindle replacement').
3. Bore a hole in the workpiece of the same size as, or slightly bigger than, the outside diameter of the rivet to be installed.
4. To install the rivet, open the handles outwards as much as possible and screw the pin onto the mandrel clockwise, until the
head is reached.
NUT DIRECTION
4
IT IS IMPORTANT READ THIS MANUAL THOROUGHLY
BEFORE USING THE TOOL. FAILURE TO COMPLY WITH THE
SAFETY STANDARDS AND OPERATING INSTRUCTIONS
MAY RESULT IN SERIOUS INJURY.
DO NOT USE THIS TOOL FOR ANY PURPOSE OTHER
THAN INTENDED. DO NOT MODIFY THE TOOL FOR OTHER
PURPOSES OR USES.
ALWAYS USE PERSONAL PROTECTIVE EQUIPMENT.
Pin size
5 mm
10-24
6 mm (1/4")
1/4-20
7 mm (9/32")
5/16-18
9 mm (3/8")
3/8-16
11 mm (7/16")
1/2-13
13 mm (17/32")
15 mm (3/5")
Mandrel size
7 mm (9/32")
9 mm (3/8")
11 mm (7/16")
13 mm (17/32")
17,5 mm (7/10")
Pin size
EN I