GPO RANGEGUIDE 2800 8x50 Modo De Empleo página 29

Direct distance / horizontal distance
/ angle
30°
Horizontal distance
HR: 866m
56 56
Selecting the display mode
Switch on the instrument by pressing the measurement
button . In standby mode (within 15 seconds, target is lit),
press the menu button for > 2 seconds to enter the display
M
selection menu.
LOS ONLY flashes (after 20 seconds the device automatically
saves the setting and returns to the standby mode).
While LOS ONLY or one of the 3 other display modes is
flashing, you can use the measurement button to go to the
next selection and select one of the 4 operating modes.
The setting is saved by pressing the menu button . If you
do not confirm the setting by pressing the menu button ,
the last setting selected is automatically saved after 20
seconds of inactivity.
57 57
M
M
EN IT