BERGNER BG-50035-WH Manual De Instrucciones página 4

EN
OVERVIEW OF THE COMPONENTES
General description
1. Measuring cap
2. Lid
3. Plastic jar
4. Stirring blade base
5. Motor base
6. Main housing
7. Bottom
IMPORTANT CAUTION
Read these instructions carefully before using the appliance and save them for further reference.
• Check if the voltage indicated on the base of the appliance corresponds to the local mains voltage
before you connect the appliance.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not use the appliance when the mains cord, the plug or other components are damaged.
• Make sure all parts are correctly mounted before you switch on the appliance.
• Do not remove the lid when the appliance is in operation.
• Always unplug the appliance after use.
• If the supply cord is damaged, must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
• The water temperature should not be over 60°C when cleaning the unit.
• Do not run this unit long-time, otherwise the inner parts will be damaged.
• Do not put the whole or parts of the appliance/body into water .
• Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
• Do not use the appliance if the rotating sieve is damaged.
• Switch off the appliance and disconnect from supply before changing accessories or approaching parts
that move in use.
• Be careful if hot liquid is poured in as it may be ejected from the appliance due to sudden steam.
• The appliance is intended for household use only.
• This appliance is intended for use in domestic and similar applications, such as:
- Staff kitchen areas in shops, offices and other working environments;
- Cottages;
- By customers in hotels, motels and other residential type environments;
- Bed and Breakfast type environments.
6
BEFORE FIRST USE
• All parts of the blender have to be thoroughly cleaned before being used for the first time.
• Connect the device to the mains supply.
HOW TO USE BLENDER
1. Check the switch knob on the "0" bit pointer position.
2. Place the food you wish to process into the cup.
3. Put the lid on the cup and close securely. Place the measuring cap into the hole in the lid.
4. Switch on the motor base and turn clockwise (right):
Speed setting Use
1 (Low) For light usage with liquids.
For more solid consistency – for mixing liquids and solid
2 (High)
food.
0 Stop operation.
P (Pulse setting) Short, powerful impulse movements.
(The switch does not permanently engage in the" P " setting. You have to hold the switch in the "P" setting or
push it repeatedly.)
NOTE:
operate the motor for a maximum of 2 min. or alternating 2 min. on, then 2 min. off to prevent
overheating or consequent damage.
HOW TO CLEAN
• The appliance is easier to clean, immediately after use.
• Do not use abrasive cleaning agents, scourers, acetone, alcohol etc. to clean the appliance.
1. Switch the appliance off, remove the plug from the wall socket and wait until the blade has stopped
running.
2. Turn blender cup to loosen counter-clockwise.
3. Clean these parts with the cleaning brush in warm water with some washing-up liquid and rinse them
under the tap.
4. Clean the motor unit with a damp cloth.
Never immerse the motor unit in water nor rise it under the tap.
7
EN