Nanoleaf 4D Guia De Inicio Rapido página 5

EN
WARNINGS & CAUTIONS Please read this safety information carefully and keep this document for future reference. Help articles and
customer support is always available at https://nanoleaf.me/support. This Nanoleaf® product is not designed, certified, nor intended for
use in: enclosed locations that limit the flow of air and/or trap heat which contributes to an environment temperature over 40 degrees
Celsius; outdoor areas, regardless of weather conditions; wet or damp conditions; regions or countries other than that in which the product
was intended for and certified for sale in. When using this Nanoleaf® product: Do not open or disassemble the device, as this will void the
warranty and make the product unsafe for use. If adhesive tape is a component of this product, please note that it is not designed to be
used with unpainted brick wall, wallpaper, uneven/textured surfaces, or highly porous surfaces. Do not connect this device to another
manufacturer's product. Interconnection shall be made only by the use of the supplied connectors. Any open ends must be sealed-o
before use. The flexible cable and power supply cannot be replaced by another third party product. If the cable is damaged, the entire
controller and power supply should only be replaced with original equipment manufactured by Nanoleaf®. Using any non-approved
replacement component will void the warranty and may present a serious safety hazard. Only use the control provided with or specific by
these instructions to control the lamp. The lamp of this device will not operate properly when connected to a standard (incandescent)
dimmer or dimming control. Availability and performance of certain features are service-, device-, and network-dependent and may not be
available in all areas. All features, functionality, and product specifications are subject to change without notice or obligation. This Nanoleaf
product is primarily intended for decorative use, with RGBW output function that can dim. This product is a containing product with multiple
light sources and one control gear which can be replaced when the end of its life cycle is reached. Each light source is rated energy class G.
The light sources or separate control gear are not intended for use in other applications combined. The light source of this device is not
replaceable. When the light source reaches its end of life, the whole luminaire shall be replaced. CLEANING AND MAINTENANCE Do not clean
the device with liquid or sprays when it is connected to power. Clean with a soft dry cloth, and do not use harsh cleaning agents. Manage in
accordance with disposal laws in your area. WI-FI/RF The normal use of your device does not allow a usage with a separation distance of
less than 20 cm. The antenna is fixed with the device and not exchangeable by the end user.The antenna is fixed with the device and not
exchangeable by the end user. CE INFORMATION The light source contained in this device shall only be replaced by the manufacturer or this
service agent or a similar qualified person. NanoGrid Limited (Nanoleaf®) hereby declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity is available at
https://nanoleaf.me/eudocs. WARRANTY INFORMATION Nanoleaf® warrants that this device's hardware components will be free from
defects in material and workmanship for a period of two (2) years from the date of purchase, unless a di erent period is stated in or on the
packaging of the product, based on up to 3 hours average working time per day/7 days per week, when used as directed (the "Warranty
Period"). Notwithstanding the foregoing, the Warranty Period for all Energy Star-certified products is three (3) years from the date of
purchase. This limited warranty only applies to the hardware components contained in the original packaging. This limited warranty does
not apply to any software, even if packaged or sold with the hardware components. Nanoleaf® does not warrant that use of this device will
be uninterrupted or error-free. If this device does not conform to this limited warranty, Nanoleaf® will send you, at its election, a
replacement device or refund your original price upon receipt of the returned device, register receipt and proof of purchase. Please reach
out to our customer support to find out how to return the device. This limited warranty does not cover devices subject to accident, neglect,