Step 3- Installing Panel Clips
1. Postition Panel Clips in locations indicated in Figures 1 and 1A. Ensure Panel Clips are oriented in the
same direction facing outside the Pergola!
2. P anel Clips should be placed in the centre of the post or the leading edge of the clip should be 1 3/8" or 3.5cm
away from the side of the post as shown in Fig. 2.
3. W ith Panel Clips in place, mark screw holes with a pencil and pre-drill holes with a 1/8" drill bit. (Not provided)
4. S ecure Panel Clips in locations indicated in figure 1 and 1A with S7- #8 x 1 1/2" wood screws.
12x
4x4 Post
P
Fig. 1A
(Inside
Pergola)
1 3/8"
(3.5cm)
Pre-drill holes and secure with S7- #8 x
1 1/2" Wood Screws
Fig. 1
75"
40"
(101.6cm)
(25.3cm)
6x - Panel Clips
12x
6
(Outside
Pergola)
(190.5cm)
#8 x 1 1/2" Wood Screw
S7
