Idiomas disponibles
Idiomas disponibles
3o Take out the lower basket ( 2 ) by lifting the
basket up from the rail system.
4. Press the fixing hook of the rail system.
5. Holding the top of the Freezer Drawer, pull it out all
the way, and then remove it from the rail system.
Z_
Be careful not to scratch or dent the sliding
CAUTION rail by letting it strike the floor.
Make sure that you mount the freezer
CAUTION basket in the right position when removing
/ installing the freezer door. Failing to do
so may result in the door not opening or
closing properly.
X
ASSEMBLE
THE FREEZER
DRAWER
To reattach the drawer after you have moved
the fridge to its final location, assemble the parts
in reverse order.
ADJUSTING
THE LEVEL
Make sure the refrigerator is level so that you can
make final adjustments. Use a level to test if the
refrigerator is level both side to side and back to
front. If the refrigerator is not level, it will not be
possible to get the doors perfectly even, which
may cause moisture condensation
and increased
energy bills. Below is an example of how to level
the refrigerator if the left side of the refrigerator is
lower than the right side.
How to adjust the lever
1. Open the freezer drawer and remove the lower
basket.
2. Insert a flat-blade screwdriver (-) into a notch
on the left control lever, and turn it counter-
clockwise to level the refrigerator. (You turn the
lever clockwise to lower the refrigerator and
counterclockwise
to raise it.)
flat-blade
screwdriver
(-) Control
Lever
Z_
Both control levers must be touching the
CAUTION
floor to avoid possible personal injury or
property damage because of tipping.
If the right side is lower, perform the same
procedure, but with the right control lever.
®
It is difficult to remove the cover leg
front from the refrigerator, so we do not
recommend making small adjustments
with the control lever. Instead, refer to the
next page for the best way to make minor
adjustments to the doors.
sett
qg up 09
/
DA68
0260',_}A.indb 09
2012.',_}.15 2:5',_}:',_}5 PIt[
I
