SEVERIN PG 8575 Manual página 28

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63
The high-temperature programs have a fixed temperature . The time can be changed . The time
display in the pizza programs alternates between 07:30 and 7' (diameter of the pizza in inches) . If
you increase the time, the diameter value increases automatically .
Examples of pizza diameters: 7' = 18 cm Ø, 10' = 25 cm Ø, 12' = 30 cm Ø
DE
The time display in the Beef / Grill program alternates between the degree display and
GB
50 (cooking level) .
Examples of cooking levels: 30 = Rare, 50 = Medium Rare, 70 = Medium, >70 = Well Done
FR
If you increase the time, the cooking level increases automatically .
The appliance will beep after about 1 minute . After the beeps, turn the food for an optimal
NL
cooking result .
Press the control knob to confirm the selection .
ES
f
Preheating starts automatically .
When preheating is complete, the appliance emits short beeps, and the display shows
IT
"FILL in/Open" . The preheat icon goes out .
Failure to start a program within 30 minutes of preheating automatically restarts preheating in
order to keep the temperature high .
Open the door and pull the accessory out with the oven glove .
f
Place the food on the accessory .
f
Push the accessory with food back into the cooking chamber .
f
Close the door .
f
Closing the door automatically starts the selected program and the countdown timer .
The timer will pause if you open the door while the program is running . The display shows
PAUSE .
The program resumes once the door is closed again .
You can adjust the time during the program . To do so, press
control knob . The appliance beeps at the end of the program . The display shows "END" .
28
and adjust the time with the
loading