Idiomas disponibles
Idiomas disponibles
a
Quick start guide
Rechargeable table lamp
1. On/off button (A)
2. Light mode (A)
3. Adjust brightness (A)
4. USB-C connector (B)
Safety
About this document
This document is the user manual and contains all the information
for correct, efficient and safe use of the product. Ensure you have
fully read and understood the instructions in this document before
you use the product.
General safety
Keep the manual for future reference.
• This product is not intended for professional use.
• The manufacturer is not liable for consequential damages or for
damages to property or persons caused by non-observance of
the safety instructions and improper use of the device.
• Do not use the device if any part is damaged or defective. If the
device is damaged or defective, replace the device immediately.
• The device is suitable for domestic use only. Do not use the
device for commercial purposes.
• Do not cover the device.
• Place the device on a stable, flat surface.
• Keep the device away from flammable objects.
• Do not forget to re-charge the battery every 3 months when not
used for a longer period.
Electrical safety
• To reduce risk of electric shock, this product should only be
opened by an authorized technician when service is required.
• Disconnect the product from the mains and other equipment if a
problem should occur.
• Do not use the device if the mains cable or mains plug is
damaged or defective. If the mains cable or mains plug is
• damaged or defective, it must be replaced by the manufacturer
or an authorised repair agent.
• Before use, always check that the mains voltage is the same as
the voltage on the rating plate of the device.
LTOUT05BK
Press the button to switch on
the device.
When on, press the on/off
button to switch between
warm, neutral or cool white
light.
When on, hold the on/off
button to adjust the brightness
of the light.
Start charging the product by
connecting the USB-C cable
to both the wall charger and
the device.
Before using the product,
charge the product for 3 hours
at least.
• Do not move the device by pulling the mains cable. Make sure
that the mains cable cannot become entangled.
• Do not immerse the device, the mains cable or the mains plug in
water or other liquids.
• Do not leave the device unattended while the mains plug is
connected to the mains supply.
• Do not use an extension cable.
Cleaning and maintenance
-
WARNING
• Before cleaning or maintenance, always switch off the device,
remove the mains plug from the wall socket and wait until the
device has cooled down.
• Do not use cleaning solvents or abrasives.
• Do not clean the inside of the device.
• Do not attempt to repair the device. If the device does not
operate correctly, replace it with a new device.
• Do not immerse the device in water or other liquids.
• Clean the outside of the device using a soft, damp cloth.
Thoroughly dry the device with a clean, dry cloth.
• Clean the ventilation openings using a soft brush.
Support:
If you need further help or have comments or suggestions, please
visit www.nedis.com/support
c
Kurzanleitung
Wiederaufladbare Tischleuchte
1. On/off button (A)
2. Light mode (A)
3. Adjust brightness (A)
4. USB-C connector (B)
Sicherheit
Über dieses Dokument
Dieses Dokument ist das Benutzerhandbuch und enthält alle
Informationen für den korrekten, effizienten und sicheren Gebrauch
des Produkts. Stellen Sie sicher, dass Sie die Anweisungen in diesem
Dokument vollständig gelesen und verstanden haben, bevor Sie das
Produkt verwenden.
3
Drücken Sie die Taste, um das
Gerät einzuschalten.
Drücken Sie im eingeschalteten
Zustand die Ein/Aus-Taste, um
zwischen warmem, neutralem
oder kühlem weißen Licht zu
wechseln.
Halten Sie im eingeschalteten
Zustand die Ein-/Aus-Taste
gedrückt, um die Helligkeit des
Lichts einzustellen.
Beginnen Sie mit dem Aufladen
des Geräts, indem Sie das
USB-C-Kabel sowohl mit dem
Wandladegerät als auch mit
dem Gerät verbinden.
Laden Sie das Produkt
mindestens 3 Stunden lang auf,
bevor Sie es verwenden.
