Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
BEFORE INSTALLATION
WARNING: RISK OF ELECTRIC SHOCK! Ensure the electricity
to the wires you are working on is shut off. Either remove the
fuse or turn off the circuit breaker before removing the existing
bath fan or installing the new one.
1.
Remove existing fan.
If you are not replacing an existing fan, skip to step 3.
2.
Measure the opening to ensure it is large enough to
accommodate the 9-11/16 in. x 9-11/16 in. dimensions of the new
fan housing (A).
3.
If this fan is not replacing an old fan, be sure to cut a
10 in. x 10 in. opening for the fan housing (A).
IMPORTANT: One edge of the 10 in. x 10 in. cut out must be
along the joist for proper installation if the spacing between
joists is less than 12-3/4 inches.
1
2
3
6
