Machine Components; Safety Instructions - HSM 225.2 Instrucciones De Servicio

1. Proper use, warranty
The shredder is designed exclusively for
destroying paper. Depending on the cutting
type, it can also handle small quantities of
the following materials:
Credit and charge cards:
3.9 / 5.8 / 1.9x15 / 3.9x40 mm only
CDs, disks: 3.9 / 5.8 / 3.9x40 mm only
Its sturdy drive mechanism is not damaged
by paper clips and staples. Only on machi-
nes with safety level HS Level 6 (1 x 5 mm)
can the paper not contain staples or paper
clips.
We provide a warranty for the device in ac-
cordance with our general sales and delivery
terms. This warranty excludes wear, damage
due to improper handling, natural depreciati-
on, and actions taken by third parties.

2. Machine components

1
10
9
8
1 Warning advice
2 LEDs
3 Rocker switch
4 Cover
5 Name plate
6 Caution label
7 Bottom frame
8 Door
9 Paper feed opening
10 Feed opening for disks and CDs
0510
Paper shredder

3. Safety instructions

• Read all instructions before start-up of the
paper shredder. Save these instructions
for later use.
• Follow all warnings and instructions mar-
ked on the product!
• Make sure no liquid is spilled on or in the
paper shredder.
• If the shredder is damaged or does not
function properly, switch the device off,
pull out the mains plug and inform our
service engineers.
• Keep paper shredder out of the reach of
children.
• This shredder should be operated only
with an operator in attendance.
2
3
4
5
6
7
english
Risk of injury!
Do not reach into the paper
feed slot.
Risk of injury from slivers!
Wear protective goggles when
destroying diskettes, CDs and
hard credit cards.
Risk of injury by pulling in!
Keep long hair, loose articles of
clothing, ties, scarves, jewellery
etc. away from feed opening.
Material with the tendency to
form loops, e.g. tapes, strap-
ping material, etc. must not be
shredded.
Before changing the location,
cleaning or anything else other
than normal operation
turn off and unplug the paper
shredder!
HSM 225.2
7