Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Step 2: Top Frame Set-up
H1
G1
G2
B1
A
F
F
H2
G2
C1
B2
Fig. 2-1: Screw Center Hook (J) into the Larger Roof
Connector (E) and secure them properly.
Fig. 2-2: Connect Top Roof Supporter (F) with Larger Roof
Connector (E). Attention here: the end of Label
"→F" affixed on Larger Roof Connector (E) is used to
assemble F.
Fig.2-3：Insert G1，G2 into D，then use Screw(BB) and
Washer (CC) to fix.
Fig. 2-4& 2-5: A ladder is needed for this step--- When
placing Larger Roof Connector (E), please make sure
that, the middle connecting end of E labeled with "→H2"
should be directed to Long Bar (C1); while the part labeled
with the logo "→H1" be directed to Short Bar (C2). Connect
one end of the Corner Supporting Bar (G1&G2) with Roof
Supporter (F), and fix the other end of ( D)
Screen (A).
Fig. 2- 6 & 2-7: Connect one end of Side Supporting Bar
(Long) (H1) with larger Roof Connector (E), and secure the
other end of (H1) to the Short Bar (C2) with Screws (DD)
and Washers (CC),Nut(FF).
Fig. 2-8: Do the same for Side Supporting Bar (short) (H2)
and Larger Roof Connector (E), then fix them with Long Bar
(C1) using (DD) and (CC), (FF) to complete top frame
assembly.
with
Big
Tabla de contenido
