Idiomas disponibles
Idiomas disponibles
•
Never drag the brush cutter head assembly on the
ground while trimming.
NOTE: If the machine is overloaded, thermal protection inside
the unit will power off the brush cutter. Leave the brush cutter
for about 10 minutes before turning it on again.
MAINTENANCE
WARNING! Use only identical replacement parts when
servicing this product. Use of any other parts may create a
hazard or cause a damage to the product.
Cutting line replacement
1.
Open the brush cutter head.
2.
Extract the thread roll.
3.
Take out the thread and put a new one.
4.
Pay attention to the direction of the arrow when you put
a new thread.
5.
Roll the thread.
6.
Put the end of the thread on the notch.
7.
Put the thread roll into the brush cutter head and pull out
the end of the threads.
8.
Close the brush cutter head.
9.
Press the central part of the head to pull out more
thread.
WARNING! Before changing the thread, make sure that the
brush cutter head has stop spinning.
TECHNICAL SPECIFICATIONS
Pole saw
Rated speed: 4,500rpm
Cutting speed: 7.5m/s
Cutting length: 18.5cm
Total length: 1.92m
Weight: 3.04kg
Hedge
Rated speed: 1,200rpm
trimmer
Cutting length: 41cm
Total length: 2.25m
Distance between teeth:
22mm
Weight: 3.86kg
Brush
Thread head
cutter
Rated speed: 7,000rpm
Diameter: Ø 300mm
Weight: 3.3kg
Three-tooth blade
Rated speed: 7,000rpm
Diameter: Ø255mm
Weight: 3.35kg
COMPATIBLE PRODUCTS
Compatible with the following batteries and chargers (not
included in the product):
60013 - 4.0 Ah LI-ION BATTERY
60015 - 6.0Ah LI-ION BATTERY
60016 - 20V CHARGER
60017 - 20V FAST
DISPOSAL
Waste electrical products should not be disposed all together
with household waste.
Please take the product to a suitable recycling facility.
Check with your local authority for recycling advice.
PARTS OF THE TOOL
1.
Protector
2.
Three-tooth blade
3.
Blade
4.
Saw
5.
Handles
6.
Brush Cutter
7.
Thread head
8.
Hedge trimmer
9.
Motor housing
10.
Pole saw
8
7
3
2
· 8 ·
REF. 60040
9
5
6
1
10
4
