Idiomas disponibles
Idiomas disponibles
Cover screw threads or similar parts of the target object.
It is advisable to test the spray gun on cardboard or a similar surface to nd the correct
setting.
Important: Begin spraying outside of the target area and avoid interruptions
inside the target area.
Correct (Fig. 6a). Be sure to hold the spray gun at an even distance of approx. 10 –
30 cm to the target object.
Incorrect (Fig. 6b) Heavy spray fog build-up, uneven surface quality.
Move the spray gun evenly cross-wise or up-and-down, depending on the spray
pattern setting.
An even movement of the spray gun results in an even surface quality.
When coating material builds up on the nozzle (A) and air cap (B) (Fig. 7),
clean both parts with a solvent or water.
Fig. 7
B
A
14
Interruption of Work till 4 Hours
Turn the machine off.
When processing 2-component varnishes, clean the device inmediately.
Taking Out
of Operation and Cleaning
Proper cleaning is the prerequisite for problem-free operation of the paint application
device. No warranty claims are accepted in case of improper or no cleaning.
Unplug the power plug. Vent the container in case of longer breaks and after the work
has been terminated. This can be done by brie y turning open and then closing the
container or by pulling the trigger guard and letting the paint into the original paint
container.
Divide the spray gun. Press the unlock button (Fig. 8) downwards.
Unscrew the container. Empty any remaining coating material back into the material
tin.
Preclean the container and suction tube with a brush.
Pour solvent or water into the container. Screw the container back on. Use only
solvents with a ashpoint over 21°C .
Assemble the gun again.
Insert the power plug, turn on the machine and spray the solvent or water into a
container or a cloth.
Safety
Instructions
15
