Idiomas disponibles
Idiomas disponibles
3.3 Pairing code of pager
Long press the "Setting" button for 3 seconds. open the
function menu "F1". click the "Call" button. the menu
charging indicator (2 LEDs) will go out. and the reminder
light (4 LEDs) will be always on.
Take out the pager you want to set up (the 4 LEDs on the
pager will light up) and click the "Call" button;
3.4 Calling Pager
When the main unit is in standby mode (you can return to
standby mode by clicking the "Back" button several times.
and the screen will display 000). click on the number to
input the pager number. and then click the "Call" button;
The keypad base display window first shows "000" and
then "001" (the main unit display shows the numbers in
increasing order from 001 to 998; the user can also set
the desired number by himself/herself);
When you hear a long beep from the pager. it means the
code pairing is successful;
After the code pairing is completed. click the "Exit" button
to return to the "F1" function menu.
Note: Please make sure the pager is on the charging slot
of the host before code pairing. and complete the code
pairing operation within 10 seconds after the pager is
taken out. more than 10 seconds. the pager will
automatically exit the code pairing mode (when exiting
the code pairing mode. the 4 LEDs on the pager will be
off; then enter the 2 LEDs flashing state slowly).
The pager receives a call from the main unit and emits a
light or vibration or chirp alert;
03
