Idiomas disponibles
Idiomas disponibles
ENGINE LACKS POWER
Possible Cause
1.
Check air cleaner
Air cleaner elements clogged.
Bad fuel; engine stored without
2.
Check fuel.
treating or draining gasoline, of
refueled with bad gasoline.
3. 3. Take engine to an
Fuel filter clogged, carburetor
authorized our servicing
malfunction, ignition
dealer, or refer to shop
malfunction, valves stuck, etc.
manual.
Tuneup Specifications
ITEM
SPECIFICATION
Spark plug gap
0.028 - 0.031 in (0.7 - 0.8 mm)
IN: 0.06±0.02mm EX:
Valve clearance (cold)
0.08± 0.02mm
Other specifications
No other adjustments needed.
STORAGE
The same petrol must not remain in the tank for more than one month. Thoroughly clean the
mower and store it indoors in a dry place.
THE ENVIRONMENT
In order to protect the environment, we recommend that the following points should be given special
consideration:
• Always use pure unleaded petrol.
• Always use a funnel and/or a petrol can with a level control to avoid spillage when refilling the
fuel tank.
• Do not fill the fuel tank completely.
• Do not overfill with engine oil.
• When changing the oil, ensure that all the used oil is collected. Avoid spillage. Take the used oil
to a recycling unit
• Do not dispose of used oil filter in a rubbish bin. Take it to a recycling unit.
• Replace the silencers if faulty. When carrying out repairs, always use original spare parts.
• Always seek professional help when the carburetor requires adjustment.
• Clean the air filter according to the directions.
• When, after many years of service, your machine needs to be replaced or is no longer required, we
recommended that the machine is returned to your distributor for recycling.
Correction
Clean or replace air
cleaner elements (p. 9).
Drain the fuel tank and
carburetor (p. 5). Refuel
with fresh gasoline.
Replace or repair faulty
components as necessary.
MAINTENANCE
Refer to page 8-
See your authorized
dealer
SYMBOLS
The following symbols can be found on the machine to remind you of the care and attention that are
required during use. The symbols mean:
Important: Read the operator's manual.
Warning! Keep hands and feet clear of the cutting deck when the machine is running.
Clear the mowing area, Keep children and others a safe distance from the machine.
Warning! Keep bystanders away.
Sharp tines, beware of cutting fingers or toes, remove spark plug lead before
maintenance.
drive and stop mower.
check the grass catcher frequently for wear or deterioration;
SERVICING
Genuine spare parts are supplied by service workshops and by many dealers. We
recommend that you take the machine to an
authorized service station for annual servicing, maintenance and inspection of
safety equipment. For service and spare parts, please contact the dealer where
the machine was purchased.
The noise test code is
EN 3744 Engineering method (grade 2)
The vibration test code is
EN 1033 for hand push type mower.
