Troubleshooting (Microbrite Lights / Intellibrite Controller) - Pentair MICROBRITE Guía De Instalación Y Del Usuario

Wiring MicroBrite
®
IntelliBrite Controller and 300 Watt Transformer
The following diagram shows how to connect MicroBrite Lights to an IntelliBrite
Controller using a 300 Watt transformer. Note: For MicroBrite light operating
instructions, see page 2.
GREEN
WHITE
BLACK
12O VAC
Wall Outlet
Troubleshooting (MicroBrite Lights)
Light does not function properly:
the light.
Troubleshooting (IntelliBrite Controller)
Both of the LEDs are flashing:
box at the pool side and to the AC power switch.
The IntelliBrite Controller has detected that the load has exceeded the maximum
allowable wattage or the output is shorted out.
1. Switch off the IntelliBrite Controller OFF. Remove excessive load or
short.
2. Press the IntelliBrite Controller power switch to power on the unit.
Ensure that the LEDs are no longer flashing.
™
Color and White LED Lights to
wire nut
IntelliBrite Controller
Check the light wiring connection to the junction
GREEN
WHITE
BLACK
120 VAC Input
12 VAC Output
12 VAC
Be sure that there is 12 VAC power applied to
MicroBrite Color and White Light Installation and User's Guide
300 Watt
Transformer
AC Power cord
12 VAC
Transformer
MicroBrite Lights
19