System - Pentair MICROBRITE Guía De Instalación Y Del Usuario

16
SETTING UP MICROBRITE
WITH EASYTOUCH
®
EasyTouch Automation System
The following describes how to setup the MicroBrite Light from the EasyTouch
System indoor control panel or the EasyTouch Automation System wireless control panel.
From the EasyTouch control panel you can control the light shows.
To set up a MicroBrite light circuit;
(example; AUX 3, as "Pool Light") and "Function": assign the name "Pool Light" circuit in
the Circuit Func. menu as a "light" circuit (IntelliBrite). After assigning the circuit name
and function, the light circuit name "Pool Light" can be setup in the CONFIG menu for light
position, color etc.
To assign a Circuit Name go to: MENU > SETTINGS > CIRCUIT NAMES
IntelliFlo
IntelliChlor
Circuit Names
Circuit Func.
1. Press the
button two times to select
Off button. The circuit number (1/18) corresponds to its assigned circuit
name.
2. Press the
a name such as "Pool Light." AUX 1 has now been assigned the circuit name
"Pool Light."
To assign a Circuit Function go to: MENU > SETTINGS > CIRCUIT FUNC.
Circuit / Func. :
[POOL LIGHT
[INTELLIBRITE ]
Freeze: No
3. Press the Menu button to return to the Settings menu. Press the Down
button to and select "Circuit Func." Press the Right button to access the
Circuit Func. menu.
4. Press the
Light."
5. Press the
"Pool Light."
6. Press the
Select "INTELLIBRITE" for the MicroBrite light circuit function.
7. Press the Menu button three times to return to the main screen.
Operating the MicroBrite lights:
EasyTouch control panel button 1 (auxiliary 1 circuit). To access the Lights menu screen
(special Light Features
COLORS, ALL ON, ALL OFF, SYNC, MAGICSTREAM, CONFIG: From the Modes screen
you can control the color light shows. To access the Modes menu, press Menu > Lights >
Modes. See page 2 for MicroBrite color light shows.
MicroBrite Color and White Light Installation and User's Guide
®
AND INTELLITOUCH
Circuit Names
Circuit #: 1/18
Circuit : AUX 1
[POOL LIGHT
Up/Down button
AUX 1
Up/Down button
]
Up/Down button
to view "Circuit Functions" to assign to light circuit
Right button
Up/Down button
The MicroBrite light is ready to operate using the
), press
Menu > Lights
™ COLOR AND WHITE LED LIGHTS
assign the "Light Circuit Name" to the relay circuit
]
to select a circuit number 1/18. Press the Up
to choose this circuit for a light circuit On/
to scroll through the list of preset names. Select
to select the already assigned circuit name "Pool
to select the type of light circuit function to use.
. The Lights menu settings are: MODES,
®
AUTOMATION SYSTEM
Control
®