NICREW RGB+W 24-7 Manual De Instrucciones página 4

Infrared Remote Guide
Turn on/off the light.
Engage all LEDs to the brightest se�ng.
Press to set the current �me of day.
Press to turn light back to Timer
Mode (24/7 Mode).
Press to choose ramp �me.
Press to set hours or increase the
brightness/intensity.
Press to set minutes or decrease the
brightness/intensity.
Press to save se�ngs or move to next
step.
Demo an accelerated 24-hour
photoperiod cycle.
Preset Modes: Press corresponding bu�ons to engage Cloudy,
Thunder, Sunny or Moon Mode.
Memory: Memory func�on allows the storage of up to four preferred
color combina�ons in slots M1, M2, M3 and M4.
Se�ng:
• Choose a pre-programmed color by pressing W, R, G or B.
• Use the UP/DOWN color arrows to adjust white, red, green and
blue as desired. Each press of a corresponding arrow increases/
decreases output by 10%.
• Hold down the M1, M2, M3, or M4 bu�on un�l the light blinks.
• Custom color is now saved in that memory loca�on.
24/7 Timer Mode Overview
The LED Light Controller features up to 5 ligh�ng phases in addi�on
to the gradual ramp-up and dim-down. You can use 2 ligh�ng phases
to create a light schedule with a simple daily ON/OFF �me, or use 5
ligh�ng phases to program your light with a daily Sunrise, Daylight,
Sunset and Moonlight.
English