Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Cleaning equipment:
Keep all safety devices, air vents and the motor housing free of dirt and dust .
A.
Wipe the equipment with a clean cloth or blow it with compressed air at low pressure.
B.
We recommend that you clean the device immediately each time you have finished using it.
C.
Never use a water jet to clean the blower, wipe with a sponge or cloth soaked in neutral detergent. Do not
use cleaning agents or solvents. Do not use cleaning agents or solvents; these could attack the plastic parts
of the equipment.
D.
Ensure that no water can seep into the device.
E.
Before carrying out any cleaning, unplug the product from the power supply.
Vaccum Bag
A dirty bag will obstruct airflow, thereby reducing vacuum efficiency.
To Clean Bag:
F.
Detach vacuum bag from unit.
G.
Open zipper and remove contents.
H.
Turn bag INSIDE OUT and shake vigorously. This procedure should be performed on a regular basis.
I.
Turn bag RIGHT SIDE OUT, close zipper and attach to unit.
Note: If vacuum bag is unusually dirty, it should be washed by hand in warm water with a mild
detergent. Rinse thoroughly. Let dry before using.
Vaccum Tube Clogging
To Unclog Vacuum Tube:
• Turn engine "OFF". Promptly compress vacuum bag while it is still inflated, expelling air out of the suction
tube. This reverse airflow is usually sufficient to dislodge most obstructions.
If the obstruction cannot be cleared by compressing vacuum bag, follow this procedure:
• Remove and inspect vacuum tubes.
• Carefully clean out tube.
• Reinstall vacuum tubes.
Transportation and storage:
• Do not pull or carry the product by the power cable or allow its contact with sharp edges, cutting elements,
rough surfaces, chemical materials or oils that may damage its flexible and insulating properties.
• Store the tool in a clean, dry location protected from moisture and dust. Keep your product away from inad-
vertent children and persons unfamiliar with its use.
• Secure the unit carefully to prevent movement when it is transported.
• A unit that receives a strong shock during transport and unloading may malfunction.
• When storing the blower, choose a space indoors free from moisture and out of the reach of children.
For your engine life:
Repairs:
If required to perform any repair or maintenance, contact the nearest SCHULZ AUTHORIZED DEALER . Original
parts Schulz must be used. The use of non-original parts results in warranty loss and may cause damage to the
equipment or injury.
33
Tabla de contenido
