• Make sure the unit is properly assembled and in good operating condition.
• Check the work area that the blower will be used in and remove or cover all valuables that may be damaged
by the air blast or thrown debris..
• Make sure you can move and stand safely. Check the area around you for possible obstacles (roots, rocks,
branches, ditches, etc.) in case you have to move suddenly. Take great care when working on sloping ground.
• The power cord should always be guided to the rear, away from the device.
• If the power cord is damaged while operating the device, unplug the power cord from the socket immediately
"do not touch the power cord before disconnecting the power".
• Do not carry the device by the power cord.
• Disconnect the device from the power:
- Every time you turn off the device;
- Before removing an obstruction;
- Before checking, cleaning, or working on the device;
- When the device starts to vibrate abnormally.
•
Operate the device only in daylight or with good artificial lighting.
5. Velocity of airstream
ATTENTION:
injuries if the recommended safety equipment is not used.
• To control velocity of airstream, the product has a button with 6 setting levels.
• Experience with the unit will help you determine the amount of airflow necessary for each application.
• Stand away from the debris, at a distance that will easily allow you to control the direction of blown debris.
Never blow debris in direction of bystanders.
ATTENTION:
WARNING: Do not allow shoulder harness to cover, or any other object block, or come in contact with
the motor's air intake.
6. Switching between suction and blower mode
You can either blow or suck with this equipment.
• To activate blower mode slide the suction/blower lever downwards. Figure 8.6
• To activate suction mode slide the suction/blower lever upwards. Figure 8.7
The blower can forcibly throw objects that can bounce back resulting in serious eye
To avoid clogging vacuum tube. Do not foce or place suction tube into a pile of debris.
FIGURE 8.6
31
FIGURE 8.7