Idiomas disponibles
Idiomas disponibles
List of pictograms used*
Read the instructions!
Safety notes
Instructions for use
This product is only suitable for use
indoors, in dry and enclosed spaces.
Alternating current/voltage
Hz
Hertz (frequency)
W
Watts (effective power)
This ceiling fan with LED light is not
suitable for dimmers or electronic switches.
V
Volt
E27 LED light bulb included
Earth wire (protection class I)
Only install the light bulb in a dry
environment.
IP20
Protection type: no protection against
water! Suitable for indoor use only.
* Further details, e.g. additional symbol explanations and technical information, can be found at www.edi-light.com
Ceiling fan with LED light
Introduction
Congratulations on the purchase of your
new ceiling fan with LED light. You have
chosen a high-quality product. Please be
sure to carefully read all the instructions for use.
Unfold the pages with the illustrations. These
instructions are a part of this ceiling fan with LED
light and contain important information on setup
6
GB/IE/NI/CY/MT
For your safety!
Observe the warnings and safety
information!
Danger to life and risk of accidents
for infants and children!
Warning! Danger of electric
shock!
Caution - hot surfaces!
LED light bulb dimensions
3 speed settings available
The fan blades must be at least 2.3 m
away from the floor.
Product complies with the product-specific
applicable European directives.
SGS / GS tested
Dispose of the packaging and
the product in an environmentally
friendly manner!
The LED light source can be
LED
LED
replaced by the end customer.
and operation. Always observe all safety
information. Before using this product for the first
time, verify that the correct voltage is present and
that all parts are properly installed. If you have any
questions or are unsure about operating the ceiling
fan with LED light, please contact your retailer or
the service centre. Please keep these instructions in
a safe place and include them when passing this
product on to others.
