Idiomas disponibles
Idiomas disponibles
Westward Operating Instructions and Parts Manual
d.
Select a pair of proper and equal size extension
screws and assemble into the jaws.
e.
Put the Yoke over the extension screws and
tightly screwed in the washers and nuts.
f.
Screw in the Forcing Screw into the Yoke until it
touches the center of the shaft where the
bearings are mounted.
g.
Using a wrench (not included) to turn the Forcing
Screw clockwise until the bearing housing begins
to remove off the shaft.
h.
Continue turning the Forcing Screw until the
bearing housing is off the shaft.
i.
Remove the Forcing Screw by turning it
counterclockwise.
j.
Remove the bearing housing.
Warranty
LIMITED ONE-YEAR WARRANTY
Should this product fail to perform satisfactorily due to a defect or poor workmanship within ONE YEAR from the date
of purchase, return it to the place of purchase and it will be replaced, free of charge. Incidental or consequential
damages are excluded from this warranty.
Bearing Separator / Puller Set
Maintenance
MINOR AND ROUTINE MAINTENANCE
1.
Before each use, inspect the general condition of
the bearing puller. Check for loose attachments
binding of moving parts, cracked or broken
attachments, and any other condition that may
affect its safe operation. If any parts are missing
or broken, stop using the tool and replace with
good parts.
2.
Lubricate with "maintenance oil" attachments
regularly to ensure smooth use.
3.
Do not use tool if the threads of screws start to
wear out.
2
23NY36
