Idiomas disponibles
Idiomas disponibles
WEC-M1 Universal Remote Control
for Mitsubishi Air Conditioners
En
Product Introduction
Thank you for choosing our universal remote control. This product features patented technology that allows you to
easily control all air conditioners from the Mitsubishi brand. With its immediate setup and numerous advanced
features, this remote offers much more than traditional universal remotes.
How to Program:
Battery Installation: Completely remove the sliding cover of the remote control, insert two AAA (UM-4, LR03)
batteries, paying attention to the polarity.
Turning On the Air Conditioner: Point the remote control at the air conditioner and press the ON/OFF button. If
the air conditioner does not turn on or does not respond correctly, proceed with the code search. Aim the remote
control at the air conditioner and follow one of the two procedures indicated.
Automatic Code Search:
1.
Hold down the ON/OFF (orange) button; after about 5 seconds, codes will appear on the remote's display,
continue holding it down. Each time the code changes, the remote sends a signal to the air conditioner.
Quickly release the button as soon as you see the air conditioner turn on.
Manual Code Search - this procedure allows you to operate with more peace of mind:
1.
Hold down the ON/OFF (orange) button; after 5 seconds, a code or the symbol -- appears on the remote
control's display, then release the button.
2.
Using the temperature arrows (TOO WARM - TOO COOL), advance one code at a time; with each number
change, the remote sends a signal to the air conditioner.
3.
When the air conditioner turns on, press ON/OFF again to confirm and test the buttons.
Remote Control Test: Test the various buttons on the remote control to ensure that all functions are operational.
If some functions do not activate, repeat the code search process.
Helpful Tips:
Code Storage. Once the correct code is found, we recommend writing it down and keeping it in a safe place,
such as under the sliding cover of the remote control. This will ensure that you always have the code
available in case of accidental deletion.
Code Memory. In the event of battery replacement, the code will remain in memory for about 2 hours.
Advanced Features of the Remote Control Keypad:
The remote control keypad includes many special keys in addition to the standard operating modes. The
availability of these advanced features may vary depending on the model of the air conditioner and the settings of
the remote control itself. The number of options for adjusting the air speed is also determined by these factors.
Consult the air conditioner manual and check the availability and description of the features available on your
device. If the remote control does not activate a particular function, repeat the search from step 2 and try
another code.
Clock Function
When you insert the batteries, the time on the display will start flashing. To set it, press the CLOCK button with a
point, set the correct time using the "h" button for hours and the "min" button for minutes, and press CLOCK
again to confirm.
Note: the remote control does not have an internal oscillator and the time may not be accurate, but this does
not affect the functionality of the air conditioner.
Tutorial video
Find the remote control programming tutorial video on the KOOMANDO YouTube channel.
Distribuito da KOOMANDO Srl - Azzano Mella (BS) - Italy
