Idiomas disponibles
Idiomas disponibles
GB
MT
before checking the device,
•
cleaning it or performing
maintenance work on it.
If the device starts to vibrate
•
abnormally, an immediate
check is required, :
Examine for loose parts and
•
tighten these,
search for signs of damage,
•
replace damaged accessor-
•
ies. For repairs, contact the
service centre.
Cleaning, maintenance
and storage
Allow the motor to cool down
•
before storing the device for a
longer period.
Replace worn or damaged
•
parts in the interests of safety.
Use only original spare parts
and accessories. Using extern-
ally produced parts results in
the immediate loss of any war-
ranty claim.
The device may only be
•
opened by an authorised
electrician. Always contact
our service centre for repairs.
Switch the drive off, discon-
•
nect the device from the
power supply and allow the
device to cool off if you want
to clean, adjust, store the
20
device or to exchange an ac-
cessory part.
Handle the device with care
•
and keep it clean.
Store the device out of reach
•
of children.
Preparation
WARNING! Risk of injury due to un-
intentional start-up. Do not insert the plug
into the outlet until the device is fully pre-
pared for use.
Control elements
Familiarise yourself with the operating ele-
ments before using the device for the first
time.
On/Off switch (3)
• Switching on: Press
• Switching off: Press
Fitting the hose holder
Tools and aids required
• Phillips screwdriver (not included)
Procedure
1. Fix the hose holder (8) to the appli-
ance with the enclosed Phillips screw.
Fitting and removing
nozzles
Fitting the nozzle
1. Attach the desired nozzle (12, 13) to
the handle (11).
The nozzle locks into place.
Removing the nozzle
1. Press and hold the release on the
nozzle (12, 13).
2. Pull the nozzle off the handle (11).
