Smart Diagnosis - LG LDF8874ST Manual Del Propietário

30 SMART D IAGNOSIS M SYSTEM
SMART DIAGNOSIS TMSYSTEM
Should you experience any problems with your dishwasher, it has
the capability of transmitting data to your Smart Phone using the
LG Smart Laundry & DW Application or via your telephone to the
LG call center.
Smart Diagnosis cannot be activated unless your dishwasher is
turned on by touching the POWER button. If your dishwasher is
unable to turn on, then troubleshooting must be done without
using Smart Diagnosis.
/
s
Srnarf Diagnosis Using Your Srnarf Phone
1. Download the LG Smart Laundry & DW application on your
smart phone.
2. Open the LG Smart Laundry & DW application on your smart
phone.
3. Press the Smart Diagnosis button on your smart phone.
4. Press the Diagnose button on your smart phone.
5.
6.
Press the Dishwasher button on your smart phone.
Press the RECORD button on the smart phone and then hold
the mouth piece of the smart phone near the speaker located
on the side panel of the dishwasher. Hold the phone no more
than one inch (but not touching) the machine.
7. Press and hold the Rinse button on the dishwasher display
for three seconds.
x-@ NOTE -,
After three seconds, the display will change from 0:22 to
8. With the phone held in place, press the Smart Diagnosis
button on the phone.
NOTE
_Do not touch any other buttons or icons on the display
10.
Keep the phone in place until the tone transmission has fin-
ished. This takes about 6 seconds and the display will count
down the time.
When the recording is complete, view the diagnosis by press-
ing the Next button on the phone.
Smarf Diagnosis Through fhe Call Confer
1. Call the LG call center at: (LG U.S.) 1-800-243-0000
(LG Canada) 1-888-542-2623.
2. When instructed to do so by the call center agent, hold the
mouthpiece of your phone near the hole located on the side
panel. Hold the phone no more than one inch (but not touch-
ing) the machine.
F@ NOTE
Do not touch any other buttons or icons on the display
screen.
3. Press and hold the Rinse button on the display screen for
three seconds.
4.
5.
Keep the phone in place until the tone transmission has fin-
ished. This takes about 6 seconds and the display will count
down the time.
Once the countdown is over and the tones have stopped, re-
sume your conversation with the call center agent, who will
then be able to assist you in using the information transmit-
ted for analysis.
NOTE
Smart Diagnosis is a troubleshooting feature designed to as
sist, not replace, the traditional method of troubleshootinc _
through service calls. The effectiveness of this feature de
pends upon various factors, including, but not limited to, th_
reception of the cellular phone being used for transmission
any external noise that may be present during the transmis
sion, and the acoustics of the room where the machine is Io
cated. Accordingly, LG does not guarantee that Smart Diag