Tabla De Contenido; Important Safeguards - Interlogix UVM-2600 Manual De Usuario

EN
Content
Important safeguards 1
Introduction 2
Features 2
Connections 2
Front panel controls 3
Control panel 3
Remote control 3
Changing a monitor parameter 4
Hot keys 4
Adjustment procedure 5
OSD function 5
VGA menu (VGA / HDMI / DVI) 5
CAM menu (CAM1 / CAM2 / S-Video) 7
PIP table 9
Self-diagnosis 9
Removing the monitor stand (all
models) 9
Attaching the monitor stand 9
Troubleshooting 10
Specifications 10
UVM-2600 / UVM-3200 models 10
UVM-4200 model 12
Factory preset timings 13
UVM-2600 model 13
UVM-3200 / UVM-4200 models 14

Important safeguards

1. Installation cautions:
• Do not block any ventilation
openings.
• Always ensure that the monitor is
located in a well-ventilated area to
prevent the unit from overheating.
• Only use accessories specified by
the manufacturer or those sold with
the product.
User Manual
• Avoid operating or placing the
monitor in the following
environments: extremes of
temperatures, both hot and cold;
high humidity; direct sunlight;
excessively dusty surroundings;
avoid close proximity to other
equipment that generates a strong
magnetic field
2. Water and moisture: Do not use this
appliance near water. To reduce the risk
of fire or electric shock, do not expose
this unit to rain or moisture.
3. Power cord and power cord
protection: Power cords should be
routed so that they not likely to be
walked on or pinched. Pay particular
attention to the location of cords and
plugs, convenience receptacles, and the
point of exit from the appliance.
4. Product care: Do not touch the screen
directly with fingers. The oils from your
skin may leave marks on the surface of
the screen, which are difficult to be
removed and may damage the screen
permanently. Do not apply pressure to
the screen.
5. Cleaning: Clean only with a dry cloth.
6. Servicing: Do not attempt to service this
unit yourself. Opening or removing
covers may expose you to dangerous
voltage or other hazards. Refer all
servicing to qualified service personnel.
7. Lightning: For added protection during a
lighting storm or when this unit is left
unattended and unused for long periods
of time, unplug the unit from the wall
outlet and disconnect the cable system.
This will prevent damage to the unit due
to lightning and power line surges.
8. Mains plug (2 pin/3 pin):
• Do not remove the grounding or
earth connection from the power
supply / mains plug.
• Always remember to unplug the
monitor from the power supply
under the following circumstances if
1 EN