Idiomas disponibles
Idiomas disponibles
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
ES
and/or serious injury. Save all warnings and instructions for future reference.
PT
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
INTENDED USE
EN
▶This machine is intended for the impact drilling of concrete, stone,
and brick. The normal drilling operation is for wood, metal, ceramic,
and plastic working, as well as tightening and loosening screws.
FR
▶Only adults may use this tool.
▶Any other usage is inappropriate. Altering the device, or using parts
which were not reviewed or approved by the manufacturer, are also
inappropriate. There could be unpredictable damage to people and
objects with inappropriate usage! The manufacturer assumes no
responsibility for damages resulting from inappropriate usage.
▶When lending out or selling the tool, make sure that this user
manual is inlued.
DOCUMENT EXPLANATION
▶Read through the safety advice carefully! Pay attention to the
corresponding symbols and their meanings. Do not change the
sequence of the individual steps in the user manual. Do not leave
out any steps in the user manual.
▶Pay close attention to the special safety advice IN THE BEGINNING of
the user manual! These are conspicuously marked by the symbol for
"Attention" or "Danger".
GENERAL SAFETY WARNINGS FOR THE
TOOL
WARNING Read all safety warnings and instructions.
Failure to follow all the warnings and instructions may
result in electric shock, fire and/or serious injury.
SAVE ALL THE WARNINGS AND INSTRUCTIONS FOR FUTURE
REFERENCE
The term "power tool" in the warnings refers to your
mains operated (corded) power tool or battery operated
(cordless) power tool.
WORK AREA SAFETY
▶Keep work area clean and well lit. Cluttered and dark areas invite
accidents.
▶Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
Instruction manual
▶Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
▶Power tool plugs must match the outlet. Never modify the plug
in any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce risk
of electric shock.
▶Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
▶Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
▶Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the
risk of electric shock.
▶When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
▶If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
PERSONAL SAFETY
▶Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in serious
personal injury.
▶Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for appropriate conditions will
reduce personal injuries.
▶Prevent unintentional starting. Ensure the switch is in the off
position before connecting to power source and /or battery pack,
picking up or carrying the tool. Carrying power tools with your finger
on the switch or energising power tools that have the switch on
invites accidents.
▶Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power
tool may result in personal injury.
08725
REF.
