VELECO GRAVIS Manual De Instrucciones página 7

PRE-RIDE CHECKS
▶ It is recommended to ensure the charge level of the batteries before each ride.
▶ Before riding, make sure that the seat is securely locked in place and that neither the steering
wheel lock nor parking brake lever are in use.
▶ New users are strongly advised to set the riding mode switch to (I) before attempting to ride.
Accelerating from higher speed mode should only be performed by users who have prior
experience in operating the scooter.
▶ Before riding, the user should check if all brake levers and light switches work properly.
▶ If you are using the scooter for the first time, make sure that it stands on even ground and all
wheels are in contact with it.
SEAT
SEAT – the seat of the vehicle can be moved forward / backwards to
match user preferences. To change the distance of the seat pull the
adjustment lever located to the right side of the seat. By doing so,
lean with your back on the seat to move it to the desired position
and release the lever. Make sure that the seat is securely locked by
trying to move it without pulling the lever. If the seat moves, this
indicates that it has not been blocked correctly.
▶ DURING DAILY USAGE IT IS NORMAL FOR WRINKLES AND ABRASIONS TO OCCUR ON THE
SURFACE OF THE SEAT.
▶ ZIPS, KEYS IN PACK POCKETS AND OTHER METAL ELEMENTS OF WARDROBE CAN DAMAGE THE
SEAT UPHOLSTERY.
▶ IT IS ADVISED TO AVOID GETTING THE SEAT WET AS IT MIGHT AFFECT THE STRUCTURE OF THE
LEATHER. SOME MATERIALS MIGHT CAUSE DISCOLOURATION ON THE SURFACE OF THE SEAT
UPHOLSTERY.
MIRROR ADJUSTMENT
Before riding, adjust the mirrors position. To do it, turn the nut the clockwise direction to be able
to change the mirror position. Once done, fasten the nut with a 14 mm wrench. Rear-mirrors of the
scooter should be set at an angle that allows for unrestricted view to the back and respective side of
the vehicle. For safety, clean the mirrors regularly.
STARTING THE MOTOR
To start the motor, insert the ignition key clockwise into the ignition key switch and turn it into ON
position. To turn off the motor, turn the ignition key counterclockwise into OFF position.
advice
TURNING THE IGNITION INTO ON POSITION TURNS ON
ARMRESTS – both armrests can
be moved up and down to make
getting onto the seat easier.
seat adjustment lever
caution
!
7
EN