Sunny Health & Fitness PERFORMANCE INTERACTIVE Serie Manual Del Usuario página 14

Idiomas disponibles
  • ES

Idiomas disponibles

FUNCTION BUTTONS:
MODE:
Press the button to select TMR (TIME), DST (DISTANCE),
and CAL (CALORIES) to preset.
Press the button for selection function display value on
LCD or enter after setting.
Press the button and hold for 3 seconds to reset all values
except odometer to zero.
(When user replaces the batteries, all the values will reset
to ZERO automatically).
SET:
To set up the target value of TMR (TIME), DST
(DISTANCE), and CAL (CALORIES). Press the button and
hold for 2 seconds to speed up the increment.
RESET:
Press the button to reset function value when setting.
Press the button and hold for 3 seconds to reset all values
except odometer to zero (When the user replaces batteries,
all the values will reset to ZERO automatically).
FUNCTIONS & OPERATIONS:
1. BATTERY INSTALLATION:
Please install 2 AAA 1.5V batteries in the battery case on the back of the meter. (Whenever
batteries are removed, all the function values will be reset to zero.)
2. AUTO ON/OFF:
Once the user begins to exercise, the meter will show the workout value automatically. After
about 4 minutes of inactivity, the meter will turn off. Odometer value does not reset to 0 when the
meter turns off. When the user starts to exercise again, the workout value of odometer will
accumulate continuously.
3. AUTO SCAN:
After the meter is powered on, press MODE button and the LCD will display all function values
from TMR (TIME) - SPD (SPEED) - DST (DISTANCE) - CAL (CALORIES) - ODO (ODOMETER)
- PUL (PULSE). Each value will be held for 6 seconds.
4. SPD (SPEED):
Displays the current training speed from 0.0 to 99.9 MPH (Miles per hour).
5. DST (DISTANCE):
Accumulates total distance from 0.00 up to 9999 M (miles). The user may preset target distance
by pressing the SET & MODE buttons. Each increment is 0.1 M (Miles).
Automatically counts down from targeting value during exercise.
6. TMR (TIME):
Accumulates total time from 00:00 up to 99:59. The user may preset target time by pressing SET
& MODE buttons. Each increment is 1 minute.
Automatically counts down from targeting value during exercise.
EXERCISE METER
13
loading

Este manual también es adecuado para:

Performance interactive sf-rbe420035