Idiomas disponibles
Idiomas disponibles
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY
(877-907-8669).
STEP 7:
Remove 1 Screw (No. 20), 1 Spring
Washer (No. 37) and 1 Flat Washer (No.
35) from the Seat Support (No. 8) using
Allen Wrench (No. 125)
Attach the Rear Handlebar (No. 12) to the
Seat Support (No. 8) with 1 Screw (No.
20), 1 Spring Washer (No. 37) and 1 Flat
Washer (No. 35) that were just removed.
Don't tighten the Screw (No. 20) now.
Attach the Rear Handlebar (No. 12) to the
Seat Support (No. 8) with 1 Hex Bolt (No.
81), 1 Flat Washer (No. 35) and 1 Nylon
Nut (No. 30). Then tighten the Screw (No.
20) with Allen Wrench (No. 125) and
tighten the Hex Bolt (No. 81) with Spanner
(No. 122) at the same time.
Connect the Pulse Extension Wire 1 (No.
76) to the Pulse Wire (No. 75).
Attach the Seat (No. 52) to the Seat
Support (No. 8) with 4 Flat Washers (No.
35) and 4 Screws (No. 20). Tighten and
secure with Allen Wrench (No. 125).
Attach the Backrest (No. 53) to the Seat
Support (No. 8) with 2 Flat Washers (No.
35) and 2 Bolts (No. 17) using Allen
Wrench (No. 121).
9
